16
TROUBLESHOOTING
Trouble
Possible Cause
Remedy
(1) Power cord not
plugged in tightly.
Unplug. Then plug again after
10 seconds.
Test outlet with other
electrical appliances.
Close door well.
Refer to “Maintenance of
Microwave” to clean dirty
parts.
Replace fuse or reset circuit
breaker (repaired by
professional personnel of our
company)
(2) Fuse blowing or
circuit breaker works.
(3) Trouble with outlet.
(4) Door not closed well.
(5) Dirty roller rest and
oven bottom.
Oven cannot
be started
Glass turntable
makes noise when
microwave oven
operates
Oven does not heat
According to Waste of Electrical and Electronic Equipment (WEEE)
directive, WEEE should be separately collected and treated. If at
anytime in future you need to dispose off this product please
DO NOT dispose off this product with household waste. Please
send this product to WEEE collecting points where available.
Normal
It is forbidden to run the unit without any food inside.
It is very dangerous.
Microwave oven interfering
TV reception
Radio and TV reception may be interfered
when microwave oven operating. It is
similar to the interference of small electrical
appliances, like mixer, vacuum cleaner and
electric fan. It is normal.
In cooking, steam may come out of food. Most
will get out from vents. But some may accumulate
on a cool place like oven door. It is normal.
In low power microwave cooking, oven light
may become dim. It is normal.
Oven started accidently
with no food in
Steam accumulating on
door, hot air out of vents
Dim oven light
17
(1) In cooking state, press " CLOCK/ TIMER ", the LED will display clock for three
seconds.
(2) In the microwave cooking state, press " POWER " to inquire microwave power level,
and the current microwave power will be displayed. After three seconds, the oven will
turn back to the previous state. In multi-stage state, the inquiring way can be done by
the same way as above.
20. INQUIRING FUNCTION
When the cooking is over, the buzzer will sound 5 "beep" to alert user the cooking is
finished.
21. COOKING AND REMINDING FUNCTION
(1) In standby state, if the set clock digital tube displays current time, the icon " : " would
flash; otherwise, it shows " 0:00 ".
(2) In setting function state, LED displays corresponding setting.
(3) In working or pause state, LED displays surplus cooking time.
22. OTHER SPECIFICATIONS
Example:
To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting state, press "0/MEMORY" twice, stop pressing until the screen displays "2".
b. Press "TIME COOK" once, then press "3", "2", "0" in order.
c. Press "POWER" once, "PL10" displays, then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once then turn back to
waiting states. If you press "START/+30SEC." again, the procedure will be saved as
the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting state, press "0/MEMORY" twice,
screen displays "2", then press "START/+30SEC." to run.
