10
COUNTERTOP INSTALLATION
INSTALLATION
7.5cm
30cm
OPEN
1. Select a level surface that provides
enough open space for the intake
and/or outlet vents.
(d) Blocking the intake and/or outlet
openings can damage the oven.
(e) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or
TV reception.
2. Plug your oven into a standard
household outlet. Be sure the
voltage and the frequency is the
same as the voltage and the
frequency on the rating label.
(a) The minimum installation height is
85cm.
(b) The rear surface of the appliance
shall be placed against a wall.
Leave a minimum clearance of
30cm above the oven, a minimum
clearance of 20cm is required
between the oven and any adjacent
walls.
(c) Do not remove the legs from the
bottom of the oven.
WARNING:
Do not install oven over a
range cooktop or other heat-producing
appliance. If installed near or over a heat
source, the oven could be damaged and
the warranty would be void.
The accessible surface
may be hot during
operation.
Remove all packing material and
accessories. Examine the oven for
any damage such as dents or
broken door. Do not install if oven
is damaged.
Cabinet:
Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press " Clock/Kitchen Timer " once to select clock function, the hour figures will flash.
Note:
1) The clock will not work if it is not set when powered.
2) During the process of clock setting, if you press " Stop/Clear ", the oven will go
back to the previous status automatically.
Note:
The step quantities for the adjustment time of the coding switch are as follows:
11
OPERATING INSTRUCTIONS
1. CLOCK SETTING
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
Press " Microwave " the LED will display "P100". Press " Microwave " for times
or turn " " to choose the power you want, and "P100", "P80", "P50", "P30" or
"P10" will display for each added press. Then press " Start/+30Sec./Confirm " to
confirm, and turn " " to set cooking time from 0:05 to 95:00. Press
" Start/+30Sec./Confirm " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven using the following steps.
2. MICROWAVE COOKING
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
3) Press " Clock/Kitchen Timer ", the minute figures will flash.
1) Press " Microwave " once, the screen displays "P100".
5) Press " Clock/Kitchen Timer " to finish clock setting. ":" will flash, and the time will light.
2) Press " Microwave " once again or turn " " to choose 80% microwave power.
3) Press " Start/+30Sec./Confirm " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " Start/+30Sec./Confirm " to start cooking .
0---1 min
: 5 seconds
1---5 min
: 10 seconds
5---10 min
: 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
