background image

4 / 14  EN

Cooker Hood / User Manual

 Important safety and environmental 

instructions

This section contains safety in-

structions that will help protect 

from risk of personal injury or prop-

erty damage. Failure to follow these 

instructions invalidates the granted 

warranty.

1.1 General safety

 

Always have the installation and

repairing procedures carried out

by the Authorized Service Agent.

Manufacturing firm shall not be

held responsible for damages that

may be caused by unauthorized

persons.

 

This appliance is not intended for

use by persons  (including chil-

dren) with reduced physical,  sen-

sory or mental capabilities, or lack

of experience  and knowledge.

Children should be supervised to

ensure that  they do not play with

the appliance.

1.1.1 Electrical safety

 

Always unplug the appliance from

the mains supply during installa-

tion, maintenance, cleaning and

repair operations.

 

If the power cable is faulty, it

should be replaced by a qualified

person certified by the manufac-

turer, after-sales service or similar

(preferably an electrician) or a per-

son described by the importer.

 

Operating voltage is 220 to 240

volts.

 

If the appliance has a failure, it

should not be operated unless it is

repaired by the Authorized Service 

Agent. There is the risk of electric

shock!

 

Do not route power cable close to

hobs. Otherwise power cable may

cause fire since it melts down eas-

ily.

 

Never plug the hood before instal-

lation is completed.

 

In order to obtain the best perfor-

mance, external conductor must

not be longer than 4 m. It must not 

contain more than 2 perpendicular 

(90°) angles and its diameter must 

be min. ø120 mm.

 

Disconnect the appliance from

mains before any intervention to

the internal parts of the appliance.

 

Use the appliance with a grounded 

outlet only.

Summary of Contents for DCB9630B

















Reviews: