manualshive.com logo in svg

Davolink DV-201DM, User Manual, Page: 54 / 73

Share
Download
Davolink DV-201DM User Manual Download Page 54

 

  DV-201DM for H.323 & SIP 

 

 

1. Change NAT mode. 

2. Change IP Address. 

3. Change IP Netmask. 

4. Change Def. G/W IP. 

5. Change DNS Server IP. 

6. Change DNS Domain Name. 

0. Exit Menu. 

What do you want to change (0-7) ? : 

1 

©

 

Enter mode (enable/disable) : 

enable 

©

 

 

-------- WAN Parameters -------------------------- 

NAT  mode     -  Enable 

WAN  IP  Address    -  0.0.0.0 

WAN  Subnet  Mask   -  0.0.0.0 

WAN  Gateway       -  0.0.0.0 

Ethernet Addr - 00:08:52:88:12:92 

LAN  IP  Address    -  192.168.2.12 

LAN  Subnet  Mask   -  255.255.255.240 

LAN  Gateway       -  0.0.0.0 

-------- DNS Parameters -------------------------- 

DNS Not Used 

-------------------------------------------------- 

1. Change NAT mode. 

2. Change IP Address. 

3. Change IP Netmask. 

4. Change Def. G/W IP. 

5. Change DNS Server IP. 

6. Change DNS Domain Name. 

0. Exit Menu. 

What do you want to change (0-7) ? : 

0 

©

 

You must RESET to apply modified value(s) to system. 

 

 

 

2.3.3  Modem Configuration 

 

1. Command directory 

 

DV_GW/CONFIG/MODEM> 

 

2. Command function

 

 

These commands are used for setting Modem configuration parameters. 

2 - 38 

 

 

Summary of Contents for DV-201DM










































































Reviews:

No comments