background image

n

Therefore, adequate fresh air

ingress must always be

ensured.Fig. 4

Fig. 4

 WARNING!

Fire danger!

The oil residue in the oil

filter may catch fire.

Clean

the oil filter at least once

every 3 months.

Never

operate the device without

the oil filter.

The oil residue in the oil

filter may catch fire. Never

work with open flame (ex.

flambe) near the device.

The apparatus is allowed to

be installed near a solid

fuel (e.g. wood or coal)

heater only if it has a non-

removable cover. No

sparks should be scattered.

Hot oils and fats catch fire

easily. Hot oils and fats

should never be left unat-

tended. Never try to put out

the fire with water. Turn off

the cooker. Kill the flames

carefully using a cover, fire

blanket or a similar mate-

rial.

Gas operated cookers that

do not have a cooking pot

on create high heat during

operation. A ventilation

device placed over the

cookers can be damaged

or burned for this reason.

Operate gas cookers only

when there is a cooking pot

on them.

Operating multiple gas

cookers simultaneously

creates high heat. A venti-

lation device placed over

the cookers can be dam-

aged or burned for this

WARNING AND SAFETY PRECAUTIONS

Life-Threatening Danger, Poisoning Danger! 

12.08.2020

User Manual

9

Summary of Contents for SHAPE 060 BL





























Reviews: