background image

 

 

IMPORTANT SAFEGUARDS 

When using an electrical appliance, basic safety precautions should always be 
observed, including the following: 

READ ALL INSTRUCTIONS BEFORE USING 

WARNING: To reduce the risk of fire, electrical shock, or injury to person: 

1. The product is for household use only.       
2. Connect the appliance to single-phase AC supply of the voltage specified on the 
rating plate. 
3. In order to avoid overheating do not cover the heater. 

4. The meaning of figure 

  in marking is “DO NOT COVER”. 

5. Never leave the heater unattended while it is in use. Always turn the product to the 
OFF position and unplug it from the electrical outlet when not in use. 
6. Extreme caution is necessary when any heater is used by or near children, invalids 
or elderly person and whenever the heater is left operating and unattended. 
7. The heater must not be located immediately below an electrical socket-outlet. 
8. Do not run cord under carpeting and do not cover cord with throw rugs, runners or 
the like. Arrange cord away from traffic area and where it will not be tripped over. 
9. Do not operate the heater with a damaged cord or plug, or after the heater 
malfunctions, has been dropped, or damaged in any manner.   
10. If the supply cord is damaged, it must be replaced by the manufacturer, its service 
agent or a similarly qualified person in order to avoid a hazard. 
11. Avoid the use of an extension cord as this may overheat and cause a risk of fire.   
12. Use the heater in a well-ventilated area. Do not insert or allow objects to enter 
any ventilation or exhaust opening. To prevent a possible fire, do not block air intakes 
or exhaust openings in any manner. Do not use on soft surfaces, like a bed, where 
openings may become blocked. Use the heater on flat, dry surfaces only. 
13. Do not place this heater near flammable materials, surfaces or substances, as 
there may be a risk of fire. Keep the above flammable materials, surfaces or 
substances at least 1m from the front of the product and keep them away from the 
sides and rear. 
14. Do not use the heater in any areas where petrol, paint or other flammable liquids 
are stored e.g. Garages or workshops as a hot, arcing or sparking parts inside the 
heater.  
15. Don’t use this heater in the immediate surroundings of a bath, a shower or a 
swimming pool. Never locate the heater where it may fall into bathtub or other water 
container. 
16. This heater is hot when in use. To avoid burns and personal injury, do not let bare 
skin touch hot surfaces. If provided, use handles when moving the product. 

Summary of Contents for DQ078






Reviews: