WS433-M12F-ATH-MN-EN-01
FEB-2020
SKU
WS433-M12F-ATH
HW Ver.
2.5
FW Ver.
5.04
Item Code
WS433-M12F
Wireless Sensor Transmitter 433Mhz, compatible with all DULP sensor modules, AA 1.5VDC
battery, IP67
ATH-11
Compact ambient Humidity & Temperature Sensor DULP module, M12-male connector
ATH-12-300
300mm Cable type ambient Humidity & Temperature Sensor DULP module, M12-male connector
Notes
* Must order for both wireless transmitter and sensor module
HW Ver.
FW Ver.
Release Date
Functions Change
2.5
5.04
NOV-2019
Change RF data rate by
button
Wireless Ambient Humidity & Temperature Sensor is a combination of wireless sensor transmitter WS433-M12F and
sensor ATH, it utilises Digital capacitance humidity sensor to deliver high accuracy and stable measurement. The
wireless portion is Sub-GHz technology from Texas Instruments allows long range transmission at ultra-low power
consumption. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the
configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely
from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be
switched to 625 bps to increase the communication range. It can last up to 10 years with a single AA battery. There are
a lot of applications as environment monitoring for office, warehouse, data center, hospital, agriculture...
USER GUIDE FOR WIRELESS
AMBIENT HUMIDITY &
TEMPERATURE SENSOR WS433-
M12F-ATH
This document is applied for the following products
1. Functions Change Log
2. Introduction
