Step 3: Insert the top plastic housing and locking by M2 screw.
Open the cover of the sensor then use the push button to set the data transfer speed for the first 30 seconds when the
battery is first installed, after 30 seconds the push button function does not work.
Press and hold the button for 2 seconds => LED blinks once => Release the button to set Data rate RF 50kbps.
Press and hold the button for 5 seconds => LED blinks twice => Release the button to set Data rate RF 625bps.
Press and hold the button for 10 seconds => LED blinks 3 times => Release the button to reset RF parameters
(frequency, RF output power, data rate), if held for more than 30 seconds then the button function does not
work.
Reset default WS433:
Frequency: 433.92 MHz
RF transmit power: -10 dBm
RF data rate: 50 kbps
4.2 Button Function
The Sensor tag had been pre-configured, only use this feature if you really want to change the data
rate RF.
4.3 Modbus register of WS433-TAG-01
