DAVIS XENA Series Installation Instruction Download Page 2

Page: 2 / 4

Installation

XND4, XNR4 & XNF4

XND5, XNR5 & XNF5

Turn OFF the main supply.

Cut out ceiling hole as per dimension given.

If product supplied with flex and plug, connect

plug to socket. Ignore this step if flex & plug

unavailable.

Connect the DC cable from driver to

downlight then connect mains supply.

Fold up springs and fix downlight into cut out

hole.

Turn ON the main supply.

Summary of Contents for XENA Series

Page 1: ...high voltages DO NOT MEGGER between Live and Neutral All cable conduit terminations must be installed in accordance with the designated IP rating of this product Suitable installation fastening method...

Page 2: ...g hole as per dimension given 3 If product supplied with flex and plug connect plug to socket Ignore this step if flex plug unavailable 4 Connect the DC cable from driver to downlight then connect mai...

Page 3: ...out ceiling hole as per dimension given 3 Remove downlight ring 4 If product supplied with flex and plug connect plug to socket Ignore this step if flex plug unavailable 5 Connect the DC cable from d...

Page 4: ...rly and tighten screw 8 Replace downlight ring 9 Turn ON the main supply Only XND4 XNR4 XNF4 is IC 4 rated No cover allowed for XND5 XNR5 XNF5 XND6 XNR6 XNF6 XND8 XNR8 XNF8 Dimmer connection Trailing...