3
Configure the Streaming Data Logger
In the streaming data logger’s Setup menu, click Configure Streaming Data
Logger.
Time Out Period
Normally, the streaming data logger will stream an ASCII character string
according to the Transmission Rate setting to the ham radio TNC modem.
However, the streaming data logger utilizes a time-out period for ceasing
streaming whenever software attempts to communicate to the logger. The default
setting is 5 seconds. You may adjust this value if you wish streaming to resume
sooner or later after communicating to the logger using WeatherLink or the
Streaming Data Utility.
Note:
Once communications to WeatherLink are initiated and successful, the streaming
data logger will be unable to communicate with the Streaming Data Utility until the
Time Out Period expires. If you need to communicate to the logger with both the
Streaming Data Utility and WeatherLink, you should communicate using the
Streaming Data Utility first.
APRS Baud Rate
Use this setting to determine what baud rate to send APRS data to the TNC modem
on your ham radio. The default value is 9600.
Summary of Contents for WeatherLink 6540
Page 2: ...0 ...
