Introduction
Page 2
Weather Wizard III
O
PTIONAL
A
CCESSORIES
The following accessories are designed for use with the Weather Wizard III.
• Rain Collector
Enables you to measure daily and accumulated rainfall. Separate models
measure rainfall in either 0.01 inch or 0.2 mm increments. Optional Rain
Collector Heater allows you to measure freezing rain or the moisture
content of snowfall.
• WeatherLink
®
Software and Data Logger
Logs data gathered by the Weather Wizard III, downloads it to your PC
or Macintosh
®
, and generates reports and graphical displays of your
weather data.
• Car/Boat/RV Lighter Cord
Uses the cigarette lighter in your car, RV, truck, or boat to power the
Weather Wizard III. Replaces the standard AC-power adapter.
• Sensor Mounting Arm
A single-location mounting option for all your sensors. Includes posi-
tioning for anemometer, external temperature sensor (with Radiation
Shield), and Rain Collector (with Rain Collector Shelf).
• Radiation Shield
Protects the temperature sensor from the effects of the sun’s radiated and
reflected heat. Increases the life of the sensor and the accuracy of the
readings.
• Protected Junction Box
Provides upgraded protection against radio frequency interference (RFI),
electrostatic discharges (ESD), and power surges that can come through
sensor wires. Replaces junction box included with the station.
• Extension Cables
Extends cable length for total cable runs of 80-140 feet (24-42 m) sensor
to console. Order the 4-Conductor Extension Cable [in lengths of 40 feet
(12 m) or 100 feet (30 m)] for use with the anemometer, external tempera-
ture sensor, Rain Collector, or WeatherLink.
• Junction Box Cables
Order a Standard 8-Conductor Cable for greater flexibility in the place-
ment of your console. Comes in lengths of 25, 50, and 100 feet (7.6, 15.2,
and 30.4 m).
