SONIC-ANEMO-DZP
© LCJ Capteurs 2016 – All rights reserved.
Page 2
5.
Recycling
LCJ Capteurs encourage recycling of all material when possible, following local regulations. You can find more
details about recycling by contacting the local authorities in charge of Environment Protection in your country.
European Union (and European Economic Area) only.
These pictograms indicate that the product cannot be disposed of with waste, according to
the European Directive DEEE (2002/96/CE), the Directive applying to batteries disposal
(2006/66/CE) and local waste regulations following these directives. When a chemical toxicity pictogram is
printed below this one, according to the Directive applying to batteries disposal, it means that Heavy Metals
are present (Hg = mercury, Cd = cadmium, Pb = lead) in the battery at or above the applicable cut-off
concentration specified in the Directive. This product must be given to a disposal centre, i.e. when you
purchase a new similar product, or to a designated collection point for the recycling of waste electrical and
electronic equipment (EEE). Wrong behaviour in disposal can have consequences on the environment and
human health, because of the potentially hazardous substances generally associated to electric and electronic
equipment. Your contribution to a correct disposal of this product will contribute to efficient use of natural
resources.
6.
Warranty
Your LCJ CAPTEURS product is warranted against manufacturing defects in materials and workmanship for a
period of 24 months from the date of purchase. LCJ CAPTEURS will at its discretion, repair or replace faulty
products free of charge at their premises. The warranty does not cover the installation labour and shipping
costs of the faulty parts. A proof of purchase can be asked when processing the warranty claim by written.
Once LCJ CAPTEURS approve the warranty claim, the sensor must be sent to their workshop address. LCJ
Capteurs guaranties that each wind sensor is tested and calibrated before despatch.
The warranty does not apply in the following cases:
1. Damage resulting from misuse.
2. Improper installation or inappropriate conditions of operation.
3. If the product has been damaged, open or repaired by an unapproved agent.
4. Damage resulting from lightning, fire or any similar circumstances.
Warranty is void if operation, use, installation and technical service instructions have not been followed and if
a repair has been carried out without prior agreement.
7.
Product return
Contact your dealer prior to returning a product to LCJ CAPTEURS. A Return Merchandise Authorisation (RMA)
must be issued and received before sending a product back.
2. Introduction
A conventional Wind-vane Anemometer includes mechanical rotating parts. These parts are subject to wear
and they represent sources of failure of the sensor. Our ultrasonic sensor has been designed to avoid this and
to ensure reliable and stable operation. This Wind-vane-anemometer shows very stable results over a long
term and with no maintenance.
The sound (and ultrasound) is conveyed by the
movement of the fluid in which it crosses. The electro
acoustic transducers (1) communicate between
themselves two by two using ultrasonic signals (2) to
determine, following the orthogonal axes, the wave
transit time differences induced by the air flow (3). The