Attaching the Anemometer
Page 7
6. Slide the ends of the U-bolts into the appropriate holes at the end of the sensor arm
nearest the mounting bracket.
S
LIDE
U-B
OLTS
INTO
H
OLES
7. Secure the U-bolts and anemometer arm in place using a 1/4” flat washer, 1/4” split
lock washer and 1/4” hex nut on each of the U-bolt ends.
Tighten the hex nuts with your hand so the arm is gently held in place. Do
not tighten fully until instructed to do so later on.
A
TTACH
THE
U-B
OLTS
AND
A
NEMOMETER
A
RM
