manualshive.com logo in svg

DAVIS DriveRight 8129, Installation Manual

Share
Download
DAVIS DriveRight 8129 Installation Manual Download Page 8

6

CarChip GPS/Wireless Wiring Diagrams

CarChip GPS/Wireless Wiring Diagrams

Wiring the GPS Wireless System to a CarChip Fleet Pro

Making Connections

The GPS/Wireless Interface Module for CarChip Fleet Pro can be installed 
with either the GPS Module, the Wireless On-Board Module or both. The 
instructions below assume an installation involving all three modules.

Modify your own installation as necessary.

1. Connect the GPS Module to the GPS/Wireless Interface Module by 

plugging the male connector of the GPS Module cable into the socket 
labeled “GPS” on the GPS/Wireless Interface Module.

2. Connect the Wireless On-Board Module to the GPS/Wireless Interface 

Module by plugging the male connector on the Wireless On-Board Module 
cable into the socket labeled “W” on the GPS/Wireless Interface Module.

3. Connect the GPS/Wireless Interface module to CarChip Fleet Pro by plug-

ging the male connector on the Module cable into the connector on the top 
of the CarChip Fleet Pro.

W

GPS

GPS\

Wireless

Interface

Module

# 8251

GPS

Module

# 8128

CarChip Fleet Pro

# 8246

Wireless

On-Board

Module

# 8129

Summary of Contents for DriveRight 8129

















Reviews:

No comments

Brands by name

Popular brands

Load more brands