Installation
Page 11
I
NSTALLATION
Follow the instructions below to install the various components of your CTM.
In many cases, you will need to use the installation manual supplied with the
component for specific instructions.
Note:
Before beginning the installation, disconnect the cables attached in order to configure the CTM.
Installing Antenna
You may mount the antenna on either the Sensor Mounting Arm or on a pipe,
post, or wall using the Antenna Mounting Bracket (#7684).
✦
Installing on Sensor Mounting Arm (SMA)
Attach the antenna to the ground plane as shown below; screw on until
snug. Attach the ground plane to the SMA using the #8-32 x
¾
" screws,
flat washers, split lock washers, and hex nuts as shown below.
Note:
It may be necessary to drill one or two holes in the SMA to accommodate the antenna/
ground plane assembly. If so, use the holes in the ground plane as a guide and drill holes
using a 7/32" (5.5mm) drill bit.
If necessary, drill holes using
7/32" (5.5 mm) drill bit.
Antenna
Ground
Plane
8-32 x 3/4" Screw
Flat Washer
Flat Washer
Lock Washer
#8 Hex Nut
Ground Plane
Sensor Mounting Arm
Summary of Contents for CELLULAR TELEPHONE ANTENNA KIT
Page 27: ...Schematics Page 27 ...
