manualshive.com logo in svg

DAVIS 7714 Radiation Shield, Installation Manual, Page: 8 / 16

Share
Download
DAVIS 7714 Radiation Shield Installation Manual Download Page 8

 

Page 8

Radiation Shield Manual

 

A

 

SSEMBLING

 

 

 

THE

 

 R

 

ADIATION

 

 S

 

HIELD

 

 

 

TO

 

 A

 

TTACH

 

 

 

TO

 

 

 

THE

 

 

S

 

IDE

 

 

 

OF

 

 

 

A

 

 P

 

OST

 

, 

 

TO

 

 

 

A

 

 P

 

IPE

 

, 

 

OR

 

 

 

ON

 

 

 

THE

 

 S

 

ENSOR

 

 

M

 

OUNTING

 

 A

 

RM

 

The following instructions explain how to assemble the Radiation Shield for 
installation on the side of a post, on a pipe, or on Davis’ Sensor Mounting Arm. 
Please note, however, that if you plan to mount the Radiation Shield on top of a 
post, you should follow the instructions in “Assembling the Radiation Shield 
to Attach to the Top of a Post” on page 9.

 

1. Slide the three open plates and the two remaining closed plates over the threaded 

stud ends protruding from the top of the plate and studs assembly. 

 

A

 

SSEMBLING

 

 

 

THE

 

 R

 

ADIATION

 

 S

 

HIELD

 

 P

 

LATES

 

2. Place flat washers, lock washers and plastic wing nuts over the protruding stud ends.

3. Rest the partially assembled Radiation Shield on a flat surface and proceed with 

“Mounting the Radiation Shield” on page 12.

Complete Plate

Assembly

Plates and Studs

Assembly

Open Plate

Open Plate

Open Plate

Closed Plate

Closed Plate

#8 Wing Nut

#8 Lock Washer

#8 Flat Washer

Summary of Contents for 7714 Radiation Shield

















Reviews:

No comments