Page 12
Addendum, Rev B
Wireless Vantage Pro: Powering the ISS and Testing Communi-
cation with the Console
1.
Connect the Solar Power Cable to the SIM as shown in the ISS SIM Connec-
tions illustration (page 11).
2.
Refer to this section in your ISS Installation Manual for the rest of the pro-
cedures required to power and test the ISS.
Choosing a Site for the ISS
Refer to this section in your ISS Installation Manual.
Mounting the ISS
Refer to the following illustrations and refer to this section in your ISS Installa-
tion Manual to mount the ISS.
Backing Plate
1/4" x 3" Lag Screws
1/4" Flat Washers
1/4" Flat Washers
1/4" Lock Washers
1/4" Lock Washers
1/4" x 3" Lag Screws
1/4" x 1-1/2" Lag Screws
Note:
Make sure your solar panel faces the equator.
If the Anemometer does not face North,
you will need to recalibrate the wind direction.
Mounting on a Post
ISS Fan Rev B.fm Page 12 Thursday, November 14, 2002 4:29 PM
