11
Set Transceiver IDs
Transceiver IDs tell the console/data logger which transmitting stations to
“listen to.” Use the
Set Transceiver
dialog box to view and/or configure your
station transmitter IDs and repeater ID assignments and to control the
retransmit function.
Note:
For Weather Envoy, his dialog box is the only available tool for configuring the
transmitter ID and repeater ID settings on your Envoy.
To set transceiver options:
1. Select
Set Transceiver
from the
Setup
menu.
2. Select a Station Type for each of the possible 8 channels your system may
be receiving. You must set up each station here to match the ID number
you assigned the outside transmitters. For example, if you set your sensor
suite to ID 2, you must choose ISS in the Station No. 2 field. If there is no
outside transmitting station assigned ID 3, set the Station No. 3 to “Off.”
See the WeatherLink Online Help System for more information on
configuring the stations, the retransmit feature and configuring the Envoy
for using repeaters.
Note:
The Vantage Pro2 and Vantage Vue sensor suites are set at the factory to ID 1.
