6
Install Backup Batteries
The Weather Envoy is supplied with an AC power adapter. You should install batteries
to act as backup power. Batteries will provide enough power to operate for less than one
day.
1. Find the battery cover on the back side of the Envoy case.
2. Remove the battery cover by
pressing on the arrow
embossed on the cover and
sliding the cover away from
the case.
3. Insert three AA-cell batteries,
negative terminal (flat side)
first. Replace the battery cover
on the case.
Optional: Adding an External Temperature Probe
Your wireless Weather Envoy has a built-in temperature-humidity sensor as well as the
barometer. The temperature and humidity are reported as “Inside Temperature” and
“Inside Humidity.”
You may replace the built-in temperature-humidity sensor with an external temperature
probe with a 25’ (7.6 m) cable, which can be used to measure the temperature of air,
water, or soil. The External Temperature Probe with RJ connector comes in two models:
6475 (with stainless steel probe) or 6477 (with durable plastic probe).
Simply plug the RJ connector of the
temperature probe into the RJ jack
on the bottom of the Envoy.
External
Temperature
Sensor
RJ
Connector
RJ
Jack
Summary of Contents for Vantage VUE Sensor Suite
Page 2: ......
