background image

Page | 20  

©Davis Instruments Australia V1.3 
 

7 Liability Disclaimer 

Carefully reading the manual is recommended. The manufacturer and supplier 

cannot accept any responsibility for any incorrect readings and any consequences 

that occur should an inaccurate reading take place. Any physical modifications or 

changes to the source code of the MeteoBridge will invalidate any warranty and also 

limit the extent of technical support. 

 

This product is designed for personal use, and is not intended for the design, 

construction, maintenance, operation, control, or any other use in connection with 

high risk systems. We specifically disclaim any express or implied warranty of fitness 

for purpose in connection with high risk systems. 

 

High Risk Systems means systems in environments requiring fail-safe performance 

in which the failure of the software could lead directly to death, personal injury, or 

severe physical or environmental damage. You agree that you will not use the 

MeteoBridge for any purpose in connection with High Risk Systems. 

 

MeteoBridge is a Copyright of smartbedded UG (haftungsbeschränkt), all rights 

reserved.  

 

The specifications of this product may change without prior notice. For planned 

upgrades please see www.meteobridge.com/wiki/index.php/Forum 

 

Please visit www.MeteoBridge.com for online documentation which will give more 

detail on features and lately added functions 

 

Davis Instruments Australia PTY LTD will not assume liability for incidental, 

consequential, punitive, or other similar damages associated with the operation or 

malfunction of this product. 

 

8 Warranty Information 

   

Davis Instruments Australia PTY LTD provides a 90 day limited warranty on this 

product against manufacturing defects in materials and workmanship. 

 

This limited warranty begins on the date of purchase and is only valid for the 

original purchaser of this product. To initiate warranty service please contact Davis 

Instruments Australia with proof of purchase and MeteoBridge License number. 

 

Any physical modifications or changes to the source code of the MeteoBridge will 

invalidate any warranty claim. 

 

The warranty covers defects in material and workmanship with the following 

specified exceptions: (1) damage caused by accident, unreasonable use or neglect 

(lack of reasonable and necessary maintenance); (2) damage resulting from failure 

to follow instructions contained in your owner’s manual; (3) damage resulting from 

the performance of repairs or alterations by someone other than Davis Instruments 

Australia; (4) units used for other than home use (5) applications and uses that this 

product was not intended. 

 

This warranty covers only actual defects within the product itself, and does not cover 

the cost of installation or removal from a fixed installation, normal set-up or 

adjustments, claims based on misrepresentation by the seller or performance 

variations resulting from installation-related circumstances. 
 

 

Summary of Contents for MeteoBridge DB100AU

























Reviews: