Page 6
Leaf Wetness Sensor
Mounting the Sensor Against a Wooden Surface
To mount the sensor against a wooden surface, secure the sensor to the surface
using the #8 wood screws as shown below.
M
OUNTING
ON
A
W
OODEN
S
URFACE
Mounting the Sensor on a Pipe
To mount the sensor on a pipe, stake, or pole with outside diameter between
1" and 1-1/4" (25 mm and 31 mm), secure the sensor to the pipe using the 1-1/
2" U-bolts, 1/4" flat washers, and 1/4" hex nuts as shown below. Use a 7/16"
wrench or adjustable wrench to tighten the hex nuts.
M
OUNTING
ON
A
P
IPE
