3.
Operation Instructions
Clean the appliance thoroughly before use.
Do not fill the mixing cup more than 300mL before mixing as marked on the cup, do not use
with hot liquids.
To attach; tilt back the head, insert the cup under the mixing stick and slide it upwards to the
switch and click into place on the lower mixing cup holder.
The appliance will only operate when the mixing cup is in the correct position.
Make sure the on-off switch (I-0-II) is in the “0” position before plugging the appliance into
the socket.
Plug in the appliance.
Place the switch to “I”, the appliance will begin to operate, after a few seconds you may
switch to the high speed “II”.
Note: for milkshakes it is best to use speed “I”.
Do not operate the appliance for more than 1 minute continuously.
When finished switch the on-off switch to ”0”.
Unplug the appliance.
To remove the mixing cup, tilt the mixer head back and slide the mixing cup off the mixing
stick.
Clean and allow the base unit to cool before storing.
NOTE: Always make sure the appliance is in the off “0” position before plugging it into the
socket or removing the mixing cup after use.
4. To Clean
Switch off the blender and unplug.
Never immerse the power unit, cable or plug in water.
The mixing cup is not dishwasher safe.
Whenever possible, rinse parts immediately after processing to make clean-up easier.
To clean the mixing stick and the mixing cup pour 300mL of warm, soapy water into the cup.
Plug in the appliance.
Set the switch to “I” and use for about 30 seconds.
Turn off the appliance by switching the on-off to “0”.
Unplug the appliance, tilt the head back and remove the mixing cup.
Repeat this process using clean water to rinse.
Wipe the body of the unit with a damp cloth, after appliance has been unplugged. Do not
use detergent or abrasives as these may scratch the surface.
Allow all parts to dry thoroughly before storing.