DaVinci Birch Log Set
Installation Instructions
(sku#
94500977)
Page 14 of 22
17602180
— 8/21/20
© Travis Industries, Inc.
4’ Fireplace - Log Installation - continued
Install
(2)
of
the
included
log
placement
pins
into
the
far
left
holes
on
both
ends
of
log
#2
Install
(1)
of
the
included
log
placement
pins
into
the
hole
second
from
the
right
on
log
#1
Install log #8 as shown below. The pin on log #1 inserts into the hole on the bottom of log #8. Log #8 spans the
burner and the right end angles approximately 45° downward and toward the right (see below).
NOTE
: When a log placement requires the log to span the burner,
make sure the part of the log above the burner is not directly above
a cluster of holes (see illustration below).
Install Log #5 as shown below. The log-locating pin on the left of Log #2 inserts into the hole on the bottom of log
#5. Log #5 spans the burner and angles upward and to the right (see below).
