Computer Operation
Functions and operations
9
1.Batteries Installation
Please install 1 piece of AAA 1.5V battery in the battery case on the back of monitor.
(Whenever Batteries are removed, all the functions values will be reset to zero.)
2.Auto On/Off
When the user starts to exercise, the computer will display the workout value automatically. Once the users
stop exercising for over 4 minutes, the display will turn off. All the function values will be stored. When the user
starts again, the monitor will re-start from the stored values.
** Press the button for 2 seconds, all the function value except Odometer will be reset to zero.
3.Auto Scan
After the monitor is power on or press the button, the LCD will display all functions values from Time-Calories-
Speed - Distance -Odometer- Pulse. Each value will be held for 6 seconds.
4.Speed
Display the current training speed from 0.0 to 999.9 KPH or MPH. User also can press the button to display
the Speed value.
5.Distance
Display the trip distance from 0.0 to 999.9 Km or Mile. User also can press the button to display the distance
value. (To switch Kilometer and Mile: They will be switched by holding the MODE for 5 seconds and the data
will also be cleared at the same time.)
6.Time
Display the workout time from 00:00 to 99:59. User also can press the button to display the workout time
value.
7.Calories
Display the calories consumption during training from 0.0 to 9999. User also can press the button to display
the calories consumption value.
8.Odometer
Display the total accumulated distance from 0.0 to 999.9. User also can press the button to display the Odom-
eter value.
9.Pulse
Display the current heart rate in beats per minute.
10.Reset
Press the button for 2 seconds, all the function value except Odometer will be reset to zero.
Note:
1.If the computer displays abnormally, please re-install the battery and try again.
2.Battery Spec: 1.5V AAA (1PC).
3.The batteries must be removed from the appliance before it is scrapped and that they are disposed of safely.
4.WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or
death. If you feel faint stop exercising immediately”.
