David White LR 410H Owner'S Manual Download Page 8

-8-

the influence of drugs, alcohol or 

medication. 

A moment of inattention 

while operating a tool may result in 

serious personal injury or incorrect 

measurement results.

Use safety equipment. Always wear 

eye protection. 

Safety equipment 

such as dust mask, non-skid 

safety shoes, hard hat, or hearing 

protection used for appropriate 

conditions will reduce personal 

injuries.

DO NOT use the laser viewing glasses 

as safety goggles. 

The laser viewing 

glasses are used for improved 

visualization of the laser beam, but 

they do not protect against laser 

radiation.

DO NOT use the laser viewing glasses 

as sun glasses or in traffic. 

The 

laser viewing glasses do not afford 

complete UV protection and reduce 

color perception.

DO NOT use any optical tools such 

as, but not limited to, telescopes 

or transits to view the laser beam. 

Serious eye injury could result. 

DO NOT stare directly at the laser 

beam or project the laser beam 

directly into the eyes of others. 

Serious eye injury could result.

Use caution when using instruments 

in the vicinity of electrical hazards.

Magnets

Keep the tool and laser 

target away from cardiac 

pacemakers. 

The 

magnets of the tool and 

laser target plate generate a field that 

can impair the function of cardiac 

pacemakers.

Keep the tool and laser target away 

from magnetic data medium and 

magnetically-sensitive equipment. 

The effect of the magnets of the tool 

and laser target plate can lead to 

irreversible data loss.

Use and care

Use the correct tool for your 

application. 

The correct tool will do 

the job better and safer.

Do not use the tool if the switch does 

not turn it on and off.

 Any tool that 

cannot be controlled with the switch 

is dangerous and must be repaired.

Store idle tool out of the reach of 

children and do not allow persons 

unfamiliar with the tool or these 

instructions to operate the tool. 

Tools are dangerous in the hands of 

untrained users.

Maintain tools.

 

Check for 

misalignment or binding of moving 

parts, breakage of parts and any 

other condition that may affect the 

Summary of Contents for LR 410H























Reviews: