DISCLAIMER: This installation guide is demonstrated based on DL-AP Kit. You
may refer to the following instructions if you have a new DL-A in hand with
other existing accessories needed in place.
Safety Instructions:
•
To install this product: installer must have basic drilling and wiring skills.
•
This product is meant for a standalone out swinging door only.
•
To install this product, you must use proper power source (12Volt DC, Adapter is
included)
•
As this product is meant for indoor use only. Make sure it is not exposed to rain or used
near any types of water or liquids.
•
(If product is accidently is near water unplug it immediately and contact an authorized
dealer.)
Content List:
•
1 x DL-A Biometric Door Access Terminal
•
1 x 600-pound Holding Force Electromagnetic Lock
B: Mounting Bracket
A: Armature Plate
