T H A N K Y O U . . .
2
WWW.DAVIDCLARK.COM
WWW.DAVIDCLARK.COM
12
WWW.DAVIDCLARK.COM
11
A C C E S S O R I E S
Congratulations on your purchase of the
most technologically advanced electronic
noise-cancelling headset available. As with
all of our products, DC PRO-X2 Series
Electronic Noise Cancelling Headsets are
backed by extraordinary customer service
and support.
David Clark Company assumes full
responsibility for the quality and performance
of our products. We are committed to a
policy of service whereby we will respond
in a prompt and positive manner to any
question or issue regarding one of our
products.
David Clark Company products have set
the standards of performance and excel-
lence for pilots throughout the world. Your
new DC PRO-X2 continues this legacy. We
have earned a reputation for excellence; we
intend to keep it by continuing to deserve
your confidence.
Richard M. Urella,
President
Thank you for purchasing the DC PRO-X2
A I R C R A F T - P O W E R E D M O D E L S
The
DC PRO-X2
Aircraft Powered Model
(P/N 43105G-02) provides a 6-pin
Redel
®
connector that is compatible with
aircraft that feature a 6-pin receptacle on
the aircraft panel.
The
DC PRO-X2
Aircraft-Powered Models
(P/N 43105G-04, P/N 43105G-07)
These models receive power directly
from the aircraft, when power is provided
at pin 5 of the XLR connector.
(Note: Not all aircraft with XLR-5
connectors provide power at pin 5.
The batteries provided with the headset
are only required when no power is
available at pin 5, or when the headset is
disconnected from the aircraft panel.)
(Aircraft Powered/6-Pin)
Replaceable Parts Removal/Installation
M-5B Microphone (P/N 09168P-85)
•
To remove microphone: Gently pull off foam cover. Grasp
microphone firmly and pull straight out.
•
To install microphone: Align keyway on microphone with keyway on
boom. “TALK” should be inward towards the user’s face. Push until
microphone snaps into place.
Microphone Foam Cover (P/N 40062G-02)
•
Slide foam cover over top of microphone and secure with
‘O’ ring (included).
Leatherette Ear Seals, Pair (P/N 15976P-03)
•
To remove: Gently pull off.
•
To install : Stretch earseal over lip of dome until completely seated
on dome.
Outlast
®
Technology Head Pad (P/N 15977P-04)
•
To remove: Gently pull off.
•
To install : Align head pad with headband assembly and push
all around the perimeter to engage hook-and-loop fasteners.
Control Module Mounting Clip (P/N 41068G-03)
•
Place Control Module into mounting clip and snap in place.
•
Use clip to attach Control Module to apparel or any convenient
location within the aircraft.
(Aircraft Powered/5-Pin XLR)
David Clark Company aviation headsets are covered by a 5-year warranty. We make
every effort to prevent problems and the need for repairs. In the unlikely event that
you experience a problem, David Clark Company qualified representatives are avail-
able to answer your questions and provide the best customer service in the industry.
Many repairs are covered under warranty. Contact Customer Service:
Tel. 800-298-6235
•
508-751-5800
(outside the USA)
Visit our website at
www.davidclark.com
Customer Service and Support
230-36506 FINALDC PRO-X2 QRGRev 6-19.indd 4-6
5/31/19 1:45 PM
