F I T T I N G
10
WWW.DAVIDCLARK.COM
Proper Fitting
The advanced suspension system of the DC PRO-X is designed for a simple
and comfortable fit. Proper fit is necessary for maximum effectiveness. The
headset should be worn so that the head pad lightly touches the top of the
head.
Adjust the sliding assembly on each side as necessary (see Fig. 1),
keeping slide positions equal on either side, until the center of the ear
phone aperture within the ear seal is directly aligned with the ear canal.
The ultra-soft memory foam of the ear seal will conform to the contours of the
ear to provide an adequate seal. While in the presence of noise, turn on the
ANR circuitry and then adjust headset and ear seal position for lowest noise
heard, allowing optimum performance of the Hybrid ENC technology for
communications and music listening.
To adjust microphone placement, adjust boom up/down and in/out by rotating
and flexing the boom as necessary. Ideal microphone placement is 1/8”
from the lips, as this will provide maximum intelligibility and ambient noise
rejection.
Fig. 1
