7
Pump Operation
For optimum pump performance, the strainer basket housing should always be full of water
and free from air bubbles. The water level of the pool should always be maintained to at least
halfway up the skimmer box ensuring water is in the pump at all times. From time to time it
may be necessary to re-prime the pump. This should be carried out as described on page 6.
Never run pump dry. Running the pump with no water may damage the
mechanical seals, causing leakage and flooding. Dry running damage
and associated damage is not covered under warranty. Davey SureFlo
pool pumps incorporate self-resetting thermal overload, reducing
potential damage.
Emptying the Strainer Basket
The strainer basket should be inspected frequently through the transparent lid and emptied
when a buildup of rubbish is evident. The directions below should be followed.
1. Turn off pump.
2. Close all valves in pipework.
3. Unscrew the strainer basket lid anti-clockwise and remove.
4. Remove the strainer basket by lifting upwards from its housing.
5. Empty the trapped refuse from the basket. Hose out with water if necessary.
6. Check the strainer basket for cracks, replace the strainer basket in the pump if OK.
Failure to undertake regular maintenance may cause damage not covered by warranty.
7. Replace the lid and ensure that it seals on the rubber O-ring. Firm hand tightness only is
required. The O-ring & thread can be lubricated with Hydra slip or equivalent products.
8. Open all valves in pipework.
Failure to undertake regular maintenance may cause damage not covered
by warranty.
