10
PUMP CONTROLLER OPERATION
INDICATORS
POWER ON: The main power supply to the control box is on.
PUMP RUN: The pump is operating.
LOW FLOW ALARM: Water flow has stopped with water pressure below the cut-in pressure setting.
This alarm will take 60 seconds to activate.
PUMP OVERLOAD: The thermal overload on pump contactor has tripped.
PUMP MODE BUTTON (Auto/Off/Manual)
AUTO: Pump will operate automatically via the pressure and flow switches.
OFF: The pump will not operate in this mode.
MANUAL: The pump operates manually for 2 ½ minutes then switches to AUTO mode.
FAULT RESET: Pressing this button resets all alarms.
FAULT RESET
Pressing this button resets all alarms.
ALARM FUNCTIONS
AUDIO BUzzER: Will sound when there is an alarm and automatically mute after 5 minutes.
VISUAL ALARM: Will light up when there is an alarm and will function until the fault is corrected.
Fault
Reset
PRESS
Power ON
Pump Run
Manual
Auto
Off
PRESS
Low Flow
Alarm
Pump
Overload
P/N 14238
Access By Qualified Personnel Only
1300 367 866
with
Loss of Prime Protection
R100 R
REMOTE START
Summary of Contents for RVM Series
Page 19: ...NOTES...
