13
8. Cable tie the power lead from the pump to pipework and plug into base of RainBank.
9. Open Mains water valve and check for leaks.
10. Switch on power to RainBank and check for flashing green light – light will flash
ten times as it boots up.
11. Open a tap downstream of RainBank to clear lines of air and check for leaks.
12. Press manual override button on top of RainBank to start the pump and clear
air from rainwater lines. There must be rainwater inside the tank – this is an
important part of commissioning the system.
13. Close tap and check for leaks.
MAINS
WATER
SUPPLY
RAINWATER
SUPPLY
TO TOILETS
AND LAUNDRY
Power to pump via
3 pin socket
Incoming power to RainBank®
via 3 pin plug