background image

• Page 8 •

AUTOMATIC TIME CLOCK OPERATION:

The digital timer includes a backlit Liquid Crystal Display which displays time of day in 12-Hour format with AM / 

PM indication and a selector

 

switch position indicator. The digital timer has up and down buttons for incremental 

settings.
 

Timer Setting and Functions:

To set your clock and various functions please refer to the table of instructions below.

NOTE:

When you first turn on the power to the chlorinator, it will take approximately 5 seconds for the LCD to appear on 

the screen.

Function 

Description

Selector 

Switch 

Position

Functions and Instructions

Set Clock

1

Set the current time on the digital clock

Select the 

Set Clock

 position on the selector switch to enable the 

time of day to be input. A number ‘

1

’ will appear at the left of 

the screen.

(a) The display will flash on and off as long as the selector switch 

remains at this position. Use the up   and down   buttons  to reach 

the desired times. Hold the buttons down for fast increments

Set Timer 1 - ON

2

Set the start time for the first run time sequence

Select the 

Set Clock 1-ON

 position on the selector switch. A  

number ‘

2

’ will appear at the left of the screen.

 This time factory pre-set to 6am. Proceed as per (a) in the ‘Set 

Clock” instruction to change time.

To disable this timer, move up or down to 11:59PM. Press the UP  

button one more time to turn OFF. 

NOTE:

 This step will also disable the 

time for ‘Set Timer 1 -OFF’.

8:00

6

AM

Summary of Contents for Monarch EcoSalt 13

















Reviews: