10
CONTROL PANEL LAYOUT
SELECTOR
SWITCH
1
2
3
4
5
6
7
8
Clock
Timer 1 - ON
Timer 1 - OFF
Timer 2 - ON
Timer 2 - OFF
Automatic
Manual - ON
OFF
POLARITY
FUSE 3A
OPERATION
EcoMineral
®
A
B
0%
100%
6
8:00
AM
Once the TDS level in the pool is correct the unit may be switched on.
Note: Once the unit starts there is a short time delay until the cell operates to ensure the filtration system
is primed with water.
At this point the Operation LED should be Green; if red refer below. Note: Polarity LED may be either A or B
whichever is on or brightest.
The RED Operation LED will indicate a number of different possible problem situations:
Possible Problem
Action
TDS Level Below Minimum
Add equal quantities of EcoMineral Salt and Activator
Cell is Calcified
Clean Cell
Water temperature very cold
Add equal quantities of EcoMineral Salt and Activator to
compensate for cold water
There is a problem with water flow
Check pump / pipes for blockage or damage.
Check that flow switch is connected properly
SANITISER
OUTPUT DIAL
POLARITY
INDICATOR
LEDs
OPERATION
LED
FUSE HOLDER
AND FUSE
TIMER DISPLAY &
SETTINGS BUTTONS
OPERATION
SELECTOR SWITCH
