Dave Smith Instruments Prophet 12 Operation Manual Download Page 4

Page: 4 / 104

Dave Smith Instruments

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful inter-

ference and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numerique de la classe B respecte toutes les exigences du

Reglement sur le materiel brouilleur du Canada.

For Technical Support, email:

[email protected]

CALIFORNIA PROP 65 WARNING

This product may expose you to chemicals including BPA, which is known to the State of California

to cause cancer and birth defects or other reproductive harm. Though indepen-

dent laboratory

testing has certified that our products are several orders of magnitude

below safe limits, it is our

responsibility to alert you to this fact and direct you to:

https://www.p65warnings.ca.gov for more

information.

Summary of Contents for Prophet 12









































































































Search results

Summary of Contents for Prophet 12

Reviews:

Related manuals for Prophet 12

Brands by name

Popular brands

Dave Smith Instruments Prophet 12, Operation Manual

Search results

Summary of Contents for Prophet 12

Reviews:

Related manuals for Prophet 12

Brands by name

Popular brands