6
T
AP
T
EMPO
can also be used to change the tempo while a sequence is playing. If
S
HIFT
is on while a sequence is playing, tap the button 5 times and the sequence
speed will change to the tapped tempo on the fifth hit. You can continue to tap
the button, slowing down or speeding up, and the sequence tempo will adjust
accordingly. The sequence will average and smooth out any small timing
differences.
Modes of Operation
Mopho x4 has three operating modes: program, edit, and global. In program
mode, P
ARAM
1, P
ARAM
2, and I
NC
/D
EC
are used to change from one saved
program to another. As soon as any of the programmable parameters are edited,
that parameter is displayed on the LCD, with the programmed value on the top
line, and the new, edited value on the bottom line. That is edit mode. To exit edit
mode and return to program mode, just press P
ROGRAM
.
To enter global mode, briefly press and hold P
ROGRAM
until the light goes off
and a global parameter is displayed on the LCD. P
ARAM
1 scrolls through the
items in the global menu and P
ARAM
2 and I
NC
/D
EC
change the values. For
more information, see Global Parameters on page 8.
