background image

3

DAVCO Technology, LLC

www.davco.com

800-328-2611

1600 Woodland Drive, Saline, MI  48176-1629

F1321 REV E

SHOP PRO

®

 ST

WITH 50/80 PSI PRESSURE REGULATOR 

TECHNICAL MANUAL

General Safety Precautions

• 

The Shop Pro is only approved for use with diesel fuel . 

It is not approved for use with gasoline or any other 

flammable liquids . 

• 

Read all instructions before use to avoid injury .

• 

To avoid serious injury or death, follow the safety 

information in this document .

• 

Keep this manual . If you need to replace the manual, call 

customer service at 800-328-2611 or visit www .davco .

com for a replacement .

• 

Read all product safety labels .

• 

Refer to appropriate regulations for environmental and 

workplace safety rules .

 

E

WARNING: To prevent personal injury

 - Recommended Personal Protection Equipment:
 - Eye Protection
 - Chemical resistant gloves 

• 

Avoid Fuel Spillage:  When disconnecting attachments 

equipped with Quick connect fittings, wrap a shop rag 

around the fitting to catch any residual fuel . Allow fuel to 

drain back into hoses before closing ball valves to avoid 

spillage when returning hoses to the Cart .

• 

Do not leave the Shop Pro running unattended . Follow 

engine manufacturer guidelines for proper priming 

procedures . Always disconnect the power supply when 

the Shop Pro is not in use .

• 

Scalding hazard: When diesel fuel is circulated through 

an operating engine, it can become very hot . Do not allow 

fuel to come in contact with eyes or unprotected skin . 

Allow the engine and fuel to cool to ambient temperature 

before replacing the fuel filter or performing service 

operations which could result in spillage of fuel from the 

fuel system .

• 

Fire Prevention: Heated fuel can form combustible 

vapor mixtures in the area around the fuel source . To 

eliminate the potential for fire, keep open flames, sparks 

or other potential ignition sources away from the work 

area . Do not smoke during filter replacement or service 

operations .

• 

Inhalation Precaution: Always perform engine or vehicle 

fuel system maintenance in a well ventilated area that is 

kept free of bystanders .

• 

The ignition key must be in the off position, unless 

otherwise directed . To avoid unintentional engine startup, 

use a lockout key and/or signage to alert personnel that 

work is being performed .

Government Regulations

• 

Engine fluids (oil, fuel, and coolant) may be a hazard to 

human health and the environment . Handle all fluids and 

other contaminated materials (such as filters and rags) 

in accordance with applicable regulations . Recycle or 

dispose of engine fluids, filters, and other contaminated 

materials according to applicable regulations .

 

F

IMPORTANT SAFETY PRECAUTIONS

Summary of Contents for SHOP PRO ST




















Reviews: