COOLANT HEAT INSTALLATION
Most truck OEMs currently offer engine return fuel as the
heat source for the DAVCO Fuel Pro 382 . Current common
rail engines generally do not have enough return fuel heat
or flow rate to be used as a heat source for Fuel Pros . To
address this, a DAVCO Fuel Pro 382 can be easily plumbed
for engine coolant to provide adequate heat at the primary
filter (Figure 2) .
Figure 2
Determine if the bottom plate is equipped with a fluid heat
assembly . (Figure 3) If the Fuel Pro 382 has a deep bottom
plate it is a heated assembly with a heater loop and can
be upgraded to use coolant heat .(Refer to form F3029 on
www .davco .com for upgrade instructions) .
If the bottom plate is flat, order the DAVCO fluid heat bot-
tom plate upgrade kit, DAVCO P/N 382029-23DAV .
Fluid heat bottom plate
Flat Bottom Plate
Figure 3
FUEL PRO
®
382
TECHNICAL MANUAL
T e c h n o l o g y , L L C
DAVCO Technology, LLC P. O. Box 487 Saline, MI 48176 Call 800-328-2611 www.davco.com F1271 REV J
October 3, 2016 11:34 AM
7
