PRECAUTIONS
DANGER
1. When the equipment of our company is used including robots(multi-joint robot, rectangular coordinate robot, desktop robot),
please be sure to install a safety net in the robot operation area, and never approach the operation area during operation.
2. Equipment of our company include driving and rotating parts. Install a safety net on the rotating parts and never approach it
during operation.
CAUTION
Precautions for maintenance and inspection
1. When cleaning or repairing the equipment, be sure to turn off the power and check the internal power supply for complete di-
scharging, and then have it carried out by a qualified maintenance specialist. Maintenance by non-experts can cause breakdown.
2. If there is a breakdown of the equipment, do not disassemble the equipment. Please contact our customer support team.
3. If dust accumulates on the equipment, it may cause malfunction. Clean up the equipment periodically. When cleaning, please
shut off the external power completely and check whether the equipment has been fully discharged. There is a danger of electric
shock.
CAUTION
Precautions for disposal
1. When this equipment is disposed of, treat it as industrial waste.
DANGER
1. Be sure to use the designated power supply. The basic power of the equipment is designated as AC220V 50/60Hz.
2. Be sure to use the designated air pressure. The basic air pressure of the equipment is designated as 5kgf/cm2.
3. Do not operate with wet hands. There is a risk of electric shock.
4. During the operation, do not turn off the power or shut down the air pressure unless the equipment is in danger/caution.
Serious problems may arise with the use of equipment.
Precautions on Installation
1. Do not install, store and use in places exposed to conductive dust, corrosive gas, flammable gas, high temperature, condensa-
tion, wind and rain, etc.
2. Exposure to direct sunlight for a long time will degrade accuracy of the equipment. Do not install, store, or use in areas where
there is direct sunlight.
3. When installing in an enclosed space, install a separate cooling fan to allow the outside air to flow in and out, in order to main-
tain the temperature around the equipment at 40°C or less. Overheating may cause fire or other accidents.
Precautions on Use
1. Never modify this equipment. It may cause electric shock, injury, fire or breakdown.
2. Once you modify this equipment, it cannot be covered by our warranty for defects.
3. Before use, be sure to check that all covers are properly installed and verify if there is no foreign material inside the equipment.
Depending on the circumstances, unexpected operation can occur and may result in injury.
4. If an alarm occurs during use, remove the cause of the alarm, check the safety, and reuse it.
pag
. 5
DA1000V VOLUMETRIC MANUAL DISPENSING SYSTEM
!
!