pag
. 13
N.
Code
Unit
Description
19.0
19.a
19.b
19.c
10107
10108
12602
1
Lock housing
Lock housing (for DAT 096, manual, 0-7 bar)
Lock housing (for DAT 096, manual, 0-50 bar)
Lock housing (for DAT 096, pneumatic1:1)
20.0
20024
6 / 18
Spring washer
21.0
10944
6 / 18
Cylinder head screw
22.0
10063
1
Nut (in connection with item 23.1) - (N/A for version DAT 096, pneumatic 1:1)
23.0
23.a
23.b
23.c
10138
10271
10853
1
Regulating spindle
Star grip
Regulating spindle
Regulating spindle with handwheel
(N/A for version DAT 096, pneumatic 1:1)
24.0
*
1
Connection (only for DAT 096, pneumatic 1:1)
25.0
40089
1
Sealing ring (only for DAT 096, pneumatic 1:1)
26.0
26.a
*
20154
1
1
Manometer (only for DAT 096, pneumatic 1:1)
Alternatively: Locking Screw
IMPORTANT! If the seat/seat ball system is dirty or worn, it is possible that the pressure on the outlet side will exceed the
preset pressure. If a pressure gauge whose maximum pressure is lower than the inlet pressure is installed, the pressure
gauge may be damaged if the sealing seat is not replaced/cleaned in a timely manner.
!
Nr.
Description
1
Material inlet
2
Material outlet
3
Material return flow regulator (clockwise increases the pressure - counterclockwise decreases the pressure)
4
Manometer (output side pressure)
Abb. 3.6/1
3.6 Structure and links
PRESSURE REDUCER DAT096
