360° SPRAY VALVE FOR INTERNAL DAS 50N
pag
. 3
1 INTRODUCTION
1.1 The manual
The user guide is the document that accompanies the valve from the time of its construction and throughout the period of
use, it is therefore an integral part of the valve. It requires reading the manual before taking any action involving the valve. The
manual must be readily available for use by staff and maintenance of the valve. The user and the attendant use are required
to know the contents of this manual.
Reproduction of any part of this manual, in any form, without the express written permission of DAV Tech. The text and
illustrations in this manual are not binding, the DAV tech reserves the right, at any time and without notice, the right to make
any changes to improve the product or for reasons of character manufacturing or commercial.
1.2 Warranty
The warranty is valid for a period of 12 months from the date of commissioning and no later than 15 months from the
date delivery. The interventions carried out during the warranty period does not extend in any way the validity period of the
guarantee. The seller is not liable for defects caused by normal wear of parts which by their nature are subject to wear.
1.3 Goods receiving
The original configuration of the valve must never be changed.
Upon receipt of the goods, check that:
• The packaging is intact
• The exact correspondence of the material ordered.
2 TECHNICAL DESCRIPTION
2.1 Valve Operation
DAS 50N spray valve have been designed and manufactured to be used in a variety of applications.
Their design and versatility make them suitable for any application requiring the use of spraying valves.
DAS 50N valves is low and medium viscosity fluid dispensers.
The valves are pneumatically controlled by means of external solenoid valves.
2.2 Technical Specification
Model
DAS 50N
Drive
Single acting
Weight
440 g
Max fluid pressure
Max 10 bar
Actuating air pressure
5 - 7 bar
Atomizing air pressure
0,1 - 2 bar
Input type air
Tube 6x4mm
Inlet type fluid
Tube 6x4mm
Extension length
15, 20, 30, 50, 100, 200 mm
Speed
Up to 200 cycles / min
Adjusting the passage
Micrometric
Used materials
Stainless steel, nickel-plated brass
Fluids to be dispensed
Oils, lubricants, greases up to NLGI 2, primers
