Datum DT3X360G Operating Instructions Manual Download Page 10

Page: 10 / 12

CROSSLINE LASER LEVEL

TROUBLESHOOTING

ISSUE

POSSIBLE CAUSE AND SOLUTIONS

Laser does not turn on

Check batteries. Make sure batteries are installed according to the

correct polarity.
The batteries may be depleted. Make sure the batteries are in proper

working condition. If in doubt, try installing new batteries.
If the laser has been stored in extremely hot temperatures, allow it to

cool.

Laser does not level

Instrument may be outside it’s levelling range. Position the

instrument, tripod or the base surface.
Instrument may have impact damage. Contact service centre for

repair and calibration.

PRODUCT LABELS

DT3X360R

DT3X360G

CAUTION: LASER RADIATION

DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

ACCORDING TO IEC/EN 60825-1:2014

Check piece count, headings, photos

& illustrations match on all panels

Compliance

Barcode Scans

Country of Origin

Pronto Code All Panels

Part Number All Panels

Update Details in Pronto

Supplier Contact Correct

Update Product Specification Sheet

Summary of Contents for DT3X360G













Search results

Summary of Contents for DT3X360G

Reviews:

Related manuals for DT3X360G

Brands by name

Popular brands

Datum DT3X360G, Operating Instructions Manual

Search results

Summary of Contents for DT3X360G

Reviews:

Related manuals for DT3X360G

Brands by name

Popular brands