DATREND Systems Multipurpose User Manual Download Page 2 | Manualshive

Page: 2 / 19

DATREND Systems Multipurpose User Manual Download Page 2

Looking to the Future • www.datrend.com

Introduction

The purpose of this User Guide is to demonstrate both functionality and flexibility of the Datrend Multipurpose
Backpack (P/N 7006

-

065), which can be used with vPad

-

A1, venTest, vPad

-

ES 2, vPad

-

ES, vPad

-

353 and Phase 3.

Furthermore, this document includes instructions on how to configure a modified version of the Backpack (P/N
7006

-

068) to suit a one

-

or two

-

channel vPad

-

IV analyzer.

The various configurations discussed in this manual are merely suggestions. Users may adjust the Multipurpose
Backpack to find best

-

fit solutions to suit the test equipment to be transported, whether it be a Datrend

instrument or other device. Common sense should be practised to ensure adequate protection of instrument
displays, controls and connectors, as well as accessories such as sensors, cables and power supplies. Articles
should be packed securely so that internal movement which may occur during transport will not result in damage
to test instrumentation or accessories.

Datrend Systems warrants the Multipurpose Backpack to be free from defects in material and workmanship for a
period of 90 days from the date of receipt. Datrend assumes no responsibility for Backpack contents and in no way
warrants, guarantees or implies that such contents will not suffer damage as a result of transport mishap or any
other cause.

Datrend Systems Inc. is a Canadian

-

based biomedical engineering company focused on providing solutions and

leading

-

edge biomedical test equipment for hospitals, clinics, and medical equipment manufacturers. We pride

ourselves with innovative solutions to help customers to increase their efficiency, productivity, and accuracy
through automated yet intuitive systems. We have expanded continuously since our initial launch in 1991 to serve
the global market with the best solution for our customers.

For more information, please contact us via:

Email:

[email protected]

or

[email protected]

Phone (International): +1.604.291.7747

Toll

-

Free North America: 800.667.6557

All specifications subject to change without notice.

©DATREND APRIL 2021

2/19

«
1
2
3
4
...
»

Summary of Contents for Multipurpose




















Reviews:

No comments