Installation Guide
T1-US2DS01
Installing Hard Disk Drive
Applications
1. For desktop use
T1 can stand up vertically with foot stands.
1. Unscrew the Lock screw on the Mobile Tray.
6. Replace the Lock screw on the Mobile Tray.
7. Attach the Power Cable
2. To remove the Mobile Tray, hold the mobile tray firmly and
gently pull out the tray from the housing.
3. To install a SATA HDD, simply place the HDD inside the tray
as illustrated below. (A stopper in the rear of the tray is provided
to ensure proper alignment)
4. After placing the HDD inside the tray, secure the HDD with four
screws
5. To insert the tray, hold the mobile tray firmly and push it back into
the housing.
2. For rack mount
Two T1 can be linked together with four fixed brackets.
Stick 4 Rubbers
on foot stand
QL.NB272.12
Note:
Input : AC 100~240V, 47~63Hz