background image

THE REVOLUTIONARY NEW WAY TO PRACTICE
MORSE  CODE  RECEPTION.  AN  UNLIMITED
SUPPLY  OF  PRECISION  MORSE  AT  THE  TURN
OF  A  SWITCH,  PLUS  BUILT-IN  OSCILLATOR
FOR SENDING PRACTICE.

Sends  a  continuous  stream  of  precision  Morse
in five character groups which never repeat.
Variable  speed  and  variable  delay  between
characters for optimum learning efficiency.
Letters only, numbers only, or mixed.
Built-in  tone  oscillator  for  sending  practice  (key
required).
Earphone socket for private listening.
Eleven IC, CMOS circuit for long internal battery
life.

PRECISION MORSE

The  Dantong  Morse  Tutor  sends  a  continuous  stream  of
precision  Morse  Code  in  random  five  letter  groups.  Its
sending is impeccable; it never repeats and it never tires.
You  can  select  letters  only,  numbers  only,  or  letter  and
numbers mixed, at the flick of a switch.

OPTIMUM LEARNING TECHNIQUE

Best of all not only can you vary the basic sending speed
from  6.5  to  37  words  per  minute,  you  can  also  increase
the  delay  between  letters  from  the  "correct"  value  (3  dot
periods) to a maximum of over 3 seconds.
This delay facility means that right from the start you can
learn each letter and number as it ought to be learnt, that
is with  the  dots and  dashes within a letter  fast  enough  to
form  a  complete  sound  pattern,  but  with  a  long  delay
between  each  letter.  As  you  improve  you  simply  reduce
the delay between letters.

USES YOUR TIME TO BEST ADVANTAGE

Skill at Morse reception only comes with practice and this
uses  up  valuable  leisure  time.  With  Model  D70  you  can
make every minute count because you can tailor the level
of difficulty exactly to your own ability.
Moreover  you  are  no  longer  tied  to  someone  else's
timetable.  Morse  Tutor  is  available  at  any  time  day  or
night so you can snatch a few minutes practice whenever
it  suits  you.  This  way  your  practice  sessions  can  make
use  of  time  which  would  otherwise  be  wasted,  while
travelling for example.

ALWAYS FRESH

Unlike  tapes  and  records  whose  sequence  becomes
familiar surprisingly quickly, the Morse Tutor never repeats
the  same  sequence  twice.  This  means  you  don't  have  to
ration the supply to avoid wasting it.

LEARN WITH CONFIDENCE

Morse  Tutors'  calibrated  controls  mean  there  will  be  no
doubt about when you are up to examination speed. With
today's examination fees it pays to pass first time.

AFTER THE MORSE EXAM

After  Morse  Tutor  has  helped  you  to  pass  the  Morse
Exam  it  will  painlessly  help  you  to  the  still  higher  speeds

which  are  needed  to  get  the  full  enjoyment  from  real-life
operating. Its wide speed range means that even experts
can  use  Morse  Tutor  to  keep  in  trim  or  as  a  refresher
course.

HOW TO LEARN MORSE WITH THE DATONG TUTOR

The key to learning Morse is to learn each character as a
complete sound pattern not as a set of individual dots and
dashes.  It  is  important  also  to  be  able  to  receive  Morse
reasonably well before you begin to practice sending.
Start with Morse Tutor set to between 8 and 12 words per
minute but with maximum delay between characters. This
way  you  learn  the  correct  rhythmic  sound  of  each
character in the code list. As you become familiar with the
code,  gradually  reduce  the  delay  between  letters.  Ideally
the  speed  should  always  be  slightly  faster  than  you  are
able to read comfortably.
Many  short  practice  sessions  are  much  better  than  few
long  ones.  Take  advantage  of  Morse  Tutor's  portability
and  personal  earpiece  to  snatch  as  many  practice
sessions as possible. You can learn Morse with minimum
disruption  to  your  normal  activities  by  using  time  which
would otherwise be wasted for example while travelling to
and from work.

Once  you  have  learnt  the  basic  code  and  can  recognise
the  characters  from  memory,  your  main  practice  should
consist  of  writing  down  the  output  from  Morse  Tutor.  Use
longhand  right  from  the  start  rather  than  printing,
otherwise  as  you  progress  your  ability  to  copy  Morse  will
outstrip your speed of writing. It is also beneficial to listen
to  Morse  Tutor's  output  even  at  times  when  you  are
unable  to  write  it  down.  This  helps  you  to  recognise  the
"tune"  of  each  character  and  to  split  up  the  continuous
stream into separate characters.
Do  not  be  discouraged  if  your  progress  appears  to  come
to a halt at various stages. This is quite normal and in fact
is  normally  a  prelude  to  a  significant  jump  in  receiving
speed.
When  you  have  reached  a  speed  of  about  six  words  per
minute  you  are  ready  to  begin  sending  practice.  Simply
plug a conventional Morse Key into the *KEY' jack on the
rear  panel  of  Morse  Tutor.  This  disables  the  automatic
sending  circuitry  and  the  unit  will  produce  a  tone
whenever  the  key  is  pressed  /(the  key  should  close  a
contact when pressed).

INTERNATIONAL MORSE CODE

Morse code comprises a stream of dots and dashes. If the
duration of a dot represents one time unit, a dash is three
units,  the  space  between  dots  and  dashes  within  a
character is one unit, the space between letters in a word
is  three  units,  and  the  space  between  words  is  seven
units.
When  the  'DELAY'  control  is  set  to  the  'CALIBRATE'
position  (fully  clockwise)  Morse  Tutor  produces  Morse
with  the  above  timing  and  in  five  character  groups.  As
extra  delay  is  introduced  between  letters  the  delay
between  words  becomes  just  twice  the  delay  between
letters.  Timings  within  each  letter  are  determined  only  by
the 'SPEED' control.
The basic Morse characters are given below in the form of
dots  and  dashes.  When  saying  them  either  aloud  are
mentally use "dit" to represent a dot and "dah" for a dash.
Letter  C  for  example  is  pronounced  dahdidadit.  It  is
important  to  learn  the  code  as  sounds  not  as  visual
patterns.

Summary of Contents for MORSE TUTOR D70







Reviews: