Dato F500, Quick Operation Manual

Page: 5 / 10

Function & Settings
Modes
Fan Modes
Set target temperature
Set Date&Time
The thermostat had five modes: EM HEAT, HEAT, OFF, AUTO, COOL.
* Note: EM HEAT can be activated in FACTORY SET.
Press the options under mode bar to switch among EM HEAT (should be
activated if needed), HEAT, OFF, AUTO, or COOL.
The fan can be set to AUTO mode or ON
mode.
During AUTO mode, the
fan will run based on the working condition of the compressor. If the
compressor is on heat or cool, the fan will be ON. If the compressor doesn't
work, the fan will be OFF.
During ON mode, the
fan will always be ON.
Press the options
under Fan bar to switch between AUTO and ON.
The target temperature can be set by pr or - icon on the main interface.
Press Menu, then the screen displays DATE TIME, then press Edit. Once the
screen displays SETUP YEAR first, press + or - to set the current year, then
press Next to switch to SETUP MONTH. Press + or - to set the current month.
Press Next to switch to SETUP DATE, press + or - to set the current date, then
press Next to SETUP HOUR. Press + or -to set the current hour, then press
Next to SETUP MINUTE, press + or - to set the current minute. After setting,
press Done to exit and switch to the next setting.
Note: During Date & Time setting, press Menu or Done to exit the current
setting.