EN
DATEQ XTC II manual
Connecting
5
Connecting the XTC II
All connections can be made at the rear and the front of the XTC II. Below we will explain
the function of the connectors.
Connecting
Master left/ right
The electronically balanced XLR outputs guarantee a perfect audio quality, even with long cable
runs. The same signal is available at the unbalanced cinch connectors.
Monitor output
The electronically balanced XLR outputs guarantee a perfect audio quality, even with long cable
runs. The same signal is available at the unbalanced cinch connectors.
This output can be used to connect a monitor amplifier. This output has the same mix as the
master outputs, but it has it's own volume control.
Internal jumper settings make it possible to eliminate the microphone signal from the monitor
outputs. This prevents an acoustical feedback.
Record output
A recorder, for example a computer, can be connected to this output. The record output has the
same signal as the master outputs, without a volume control.
Sub output
A extra amplifier for Bass-speakers can be connected to this output. The record output has the
same signal as the master outputs.
FX Effect insert
send
Connection to input external effect-device. When on a channel FX is chosen it pre-fader signal
is available here.
FX Effect insert
return
Connection from output external effect-device. When on a channel FX is chosen the connected
return signal will be available on its fader.
Line/ line 1/ line 2
Connection for audio sources at line-level, like CD-players, computers, MD-players, DVD-
players etc.
Phono
Connection for turn-tables. The turntable can be earthed with the earth connectors at the rear.
Microphone
Input for a dynamical microphone.
Gain
Microphone pre-gain setting.
Phones
Output for headphones.
Mad e b y
Almere/ T h e N eth erlan d s
WW W .D AT EQ.NL
