![Dateq MusiCall MPM8.8 Mono Installation Manual Download Page 23](http://html1.mh-extra.com/html/dateq/musicall-mpm8-8-mono/musicall-mpm8-8-mono_installation-manual_3748271023.webp)
EN
MusiCall Installation manual
Configuring
8
Adjusting the outputs
All the output settings can be
adjusted here.
The output zones can be given a
name. This can appears in the
console when a page is being
made.
The name of the local audio-
source can be adjusted. This
name is visible when the wallunit
switches to the local audio input.
The field ‘Default input’ indicates
the audio-source at power-up.
The slider ‘Default volume’ is used to set the volume at power-up, ‘Main volume’
indicates the maximum volume in that zone. The volume-indicator in the wallunits
display will scroll from 1 to 30, but the overall volume will be adjusted.
Each audio-output has a two-way equaliser and a loudness control. The sliders ‘High’
and ‘Low’ adjust the output equaliser. The output will latch the settings when the
‘Update’ button is pushed, and the box ‘Update outputs after upload’ is selected.
Paging and chimes can be disabled for each individual zone; besides the paging
volume can have an additional boost of 6 or 12dB. When the check-box ‘add 6dB to
local’ is selected the volume of the local input will be amplified with 6dB to increase
the intelligibility.
Configuring wallunits
In this window all the text that
appear in the wallunits display
can be adjusted to match the
language used in the region.
Configuring the consoles
Normal texts
All the texts in the console display
can be adjusted. Click the
selection box to select one of the
texts, and adjust the text if
necessary. When the text ‘Fixed
field’ appears this field is reserved
by the system.
Programming texts
Select this box to adjust the texts
in the programming menu. The
first and the last column are reserved by the system.
Summary of Contents for MusiCall MPM8.8 Mono
Page 1: ...MusiCall Installatie handleiding Installation manual...
Page 2: ......
Page 15: ......
Page 16: ......