Dateq LPM 7.3 User Manual Download Page 10

10 

Dateq LPM 7.3 Manual 

Technical specifications  

EN 

 

Technical specifications 

MONO Inputs 

MIC (channel 1..7) ........................................... XLR-3 female, electronically balanced 
 

Signal level ............................................. -54 dB @ 600 Ohm variable 

 

Impedance .............................................. 3 kOhm nominal 

 

Input noise .............................................. < -107 dB (IHF-A) 

 

Headroom ............................................... +20 dB 

 

STEREO Inputs 

DISC (Channel 3, 4 and 5)............................... Cinch 
 

Signal level ............................................. -42 dB @ 47 kOhm variable 

 

Impedance .............................................. 47 kOhm/ 25pF nominal 

 

Input noise .............................................. < -80 dB (IHF-A) 

 

Channel separation................................. > 76 dB @ 1 kHz 

 
LINE (channel 1..7)  ......................................... Cinch 
 

Signal level ............................................. 0 dB @ 600 Ohm variable 

 

Impedance .............................................. 10 kOhm nominal 

 

Input noise .............................................. < -80 dB (IHF-A) 

 

Channel separation................................. > 80 dB @ 1 kHz 

 

 

TONE CONTROL 

 
 

High ........................................................ 12 kHz 

±

12 dB, Shelving 

 

Mid .......................................................... 1400 Hz 

±

12 dB, Bell 

 

Low ......................................................... 50 Hz 

±

15 dB, Shelving 

 

 

OUTPUTS 

MASTER (XLR)................................................ +6 dB balanced/ 600 Ohm/ variable 
MASTER OUT / MONITOR/PFL (Cinch) ......... 0 dB unbalanced/ 600 Ohm/ variable 
REC (Cinch)..................................................... 0 dB unbalanced/ 600 Ohm/ fixed 
STEREO EFFECT SEND (Cinch).................... 0 dB unbalanced/ 600 Ohm/ postfader 
PHONES (6,3 mm TRS Jack).......................... 0,3 W @ 4 Ohm/ Impedance 4..32 Ohm 
 

 

FREQUENCY RESPONCE 

Input to Master ................................................. 20 Hz...25 kHz -3 dB 
THD+N ............................................................. 0,007 % nominal 

 

GENERAL 

POWER SUPPLY 
 

Mains voltage.......................................... 230 VAC +/-10% @ 50 Hz 

 

Power consumption ................................ 20 W 

 

 

FADERSTART 

(channel 3 t/m 5) .............................................. Maximum ratings: 48V/ 0,1A; 3,5 mm jack 
 

SIZE AND WEIGHT

 

 

Front ....................................................... 483 x 355 mm (W x H) = 19”, 8HE 

 

Cutout ..................................................... 448 x 334 mm (W x H) 

 

Depth ...................................................... 107 mm 

 

Weight..................................................... 5.6 kg Net. 

Summary of Contents for LPM 7.3














Reviews: