background image

12.1. Sniper  

 

The TurboFire EVO controller is equipped with a unique programmable Sniper Mode feature 
which allows for you to slow down the movement of either analogue stick. In slowing down the 
movement of either analogue stick allows for more precise movements, which is an advantage 
when playing in a sniper situation which requires accurate aiming. 
 
After entering the TurboFire EVO Menu as detailed under section ‘10’, using the A button select 
the Sniper feature image to enter the Sniper configuration screen. If you would like to return to 
the TurboFire EVO Menu at any time press the Back button. 

 

 

 
12.1.1. Configuring Sniper  

 

When configuring Sniper you are increasing or decreasing the speed of the analogue sticks by 
adjusting the y-axis and x-axis slider bars for each analogue sticks. The y-axis is up and down 
movement, the x-axis is left and right movement. The centre of a slider bar represents the 
normal speed of the axis. When moving a slider bar to the left you are slowing down the x-axis 
or y-axis. When moving a slider to the right you are speeding up the x-axis or y-axis. 

 

In order to adjust each of the slider bars you need to scroll up or down to highlight the slider 
bar which you would like to adjust. Whilst highlighting the chosen slider bar move each of the 
sliders left or right. You can use any of the buttons shown in the following illustration: 
 

 

 
Once you are happy with your configuration press the Start button to save the configuration. As 
detailed under section ‘11’ you can now activate the feature with your chosen configuration. 

 
12.2. Remap 

 

Button remapping gives you the ultimate control over the TurboFire EVO layout by allowing you 
to choose which buttons should be pressed to activate each control.  

 

After entering the TurboFire EVO Menu as detailed under section ‘10’, using the A button select 
the Remap image to enter the Remap configuration screen. If you would to return to the 
TurboFire EVO Menu at any time press the Back button. As shown in the following illustration, 
the Remap configuration screen displays which buttons are assigned to each of the controls.  
 

 

 

SNIPER

LX

LY

RX

RY

X-Axis Left Analogue Stick Slider Bar

Y-Axis Left Analogue Stick Slider Bar

X-Axis Right Analogue Stick Slider Bar

Y-Axis Right Analogue Stick Slider Bar

Use one of these controls

Left Analogue
Stick

Direction
Buttons

Right Analogue
Stick

SNIPER

LX

LY

RX

RY

Programmable Buttons

Summary of Contents for TurboFire EVO











Reviews: