Charging Your Go-tcha
The Go-tcha charges via USB. Simply remove the Go-tcha USB device from the wrist band, slide it
into the charger and connect to a USB power source.
Simply return the Go-tcha to the bracelet when fully charged. A full charge takes approx. 1 hour and
lasts for approx. 12 hours with continuous use. Standby time is approx. 48 hours.
Using Your Go-tcha - Auto Catch
To turn the ‘Auto-catch’ function on, press the the Go-tcha button until ‘
Auto-catch
ON
’
is selected.
If you have Auto Catch on:
Go-tcha will vibrate and animate the screen to show a successful/unsuccessful catch.
Go-tcha will vibrate and animate the screen to show it has successfully/unsuccessfully collected
the items and how many items it has collected at a Pokéstop.
To turn ‘Auto-catch’ off, press and hold the Go-tcha button until ‘
Auto-catch
OFF’
is selected.
Go-tcha Screens - Catching/Caught Pokemon
Auto-catch
new Pokémon
ONLY
OFF
Auto-catch
new Pokémon
ONLY
ON
Auto-catch
OFF
New Pokémon
discovered
Auto-catch
ON
V1.4
IMPORTANT Please ensure that when the Go-tcha is inserted into the charger that the screen is blank
and not running an animation. If there is an animation running then the charging screen will not appear.
Once inserted correctly you can check that your Go-tcha is charging by pressing the screen button.
The charging animation will appear to confirm that the Go-tcha is charging. If this charging animation
does not appear, make sure that the Go-tcha is pressed firmly into the charger cable and repeat the
above steps.
